Reviewing Information On The Supplies Tab - HID HDP5000 User Manual

All rights reserved

Reviewing Information on the Supplies tab

Here are the guidelines for automatic positioning on the Supplies tab.
Step Procedure
1 Use this tab to determine the following information (see below):
•
Ribbon Level: Type, Reorder Number and Gauge Indicator.
•
HDP Film Level: Type, Reorder Number and Gauge Indicator.
•
Lamination - Cartridge 1 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate – Cartridge 1
is detected.)
•
Lamination – Cartridge 2 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate – Cartridge 2
is detected.)
HDP5000 High Definition Card Printer/Encoder User Guide
HID Global Corporation
L000950 Rev 1.8 148