Connecting a power sensor
Make sure you have connected to the P-Series soft front panel before you
NOTE
proceed. See
Power Meter GUI application"
P-Series sensor
P-Series sensor are supplied with a permanently connected sensor cable.
1 Connect the P-Series power sensor cable to the Channel A (CH A) or
Figure 1-10
2 Confirm a Read ing Sensor pop-up message appears briefly on the soft front
Figure 1-11
Keysight N8262A Installation Guide
"Step 5. Connecting to the P-Series Modular Power Meter using
Channel B (CH B) input connector.
Connecting the P-Series power sensor
panel.
Read ing Sensor pop-up window
on page 63 for details.
Getting Started
47
1