3-10.3 Switch Status - ZyXEL Communications XGS3600 Series Manual

3-10.3 Switch Status

The function Switch Status gathers the information of all VLAN status and reports it by the
order of Static NAS MVRP MVP Voice VLAN MSTP GVRP Combined.
Web Interface
To Display VLAN membership status n the web interface:
1. Click VLAN membership.
2. Specify the static NAS MVRP MVP Voice VLAN MSTP GVRP
Combined.
3. Display membership information.
Figure 3-10.3: The VLAN Membership Status for Static user
Parameter description:
VLAN USER (You can scroll to select one kind VLAN user as below:)
VLAN User module uses services of the VLAN management functionality to configure VLAN
memberships and VLAN port configurations such as PVID and UVID. Currently we support
the following VLAN user types:
CLI/Web/SNMP : These are referred to as static.
NAS : NAS provides port-based authentication, which involves communications between a
Supplicant, Authenticator, and an Authentication Server.
MVR : MVR is used to eliminate the need to duplicate multicast traffic for subscribers in each
VLAN. Multicast traffic for all channels is sent only on a single (multicast) VLAN.
MSTP : The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create multiple
spanning trees in a network, which significantly improves network resource utilization while
maintaining a loop-free environment.
Port Members

A row of check boxes for each port is displayed for each VLAN ID.
If a port is included in a VLAN, an image
If a port is included in a Forbidden port list, an image
If a port is included in a Forbidden port list and dynamic VLAN user register VLAN on same
Forbidden port, then conflict port will be displayed as
VLAN Membership :

The VLAN Membership Status Page shall show the current VLAN port members for all
VLANs configured by a selected VLAN User (selection shall be allowed by a Combo Box).
When ALL VLAN Users are selected, it shall show this information for all the VLAN Users,
and this is by default. VLAN membership allows the frames classified to the VLAN ID to be
forwarded on the respective VLAN member ports.
Auto-refresh :

To evoke the auto-refresh icon then the device will refresh the information automatically.
Upper right icon (Refresh):

You can click them for refresh the VLAN entries by manual.
port will be displayed.
XGS3600 Series User's Guide
154
forbid will be displayed.
.