Panasonic KX-NS1000 Programming Manual page 583

Collect Call Reject (for Brazil)
Group Name
Specifies the name of the trunk group for programming reference.
Value Range
Max. 20 characters
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings
Collect Call Reject (for Brazil)—Mode
Enables the PBX to automatically reject collect calls. This setting is only for users in Brazil.
Value Range
Disable, Enable
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
Collect Call Reject (for Brazil)—Wait Time
Selects the length of time that the PBX waits before sending a flash signal to reject a collect call. This setting
is only for users in Brazil.
Value Range
500 ms, 1000 ms, 1500 ms, 2000 ms
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
Collect Call Reject (for Brazil)—Flashing Time
Selects the length of the flash signal that the PBX sends to reject a collect call. This setting is only for users in
Brazil.
Value Range
1000 ms, 1500 ms, 2000 ms, 2500 ms
Maintenance Console Location
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings
PC Programming Manual 583