Panasonic KX-NS1000 Programming Manual page 313

T318
Specifies the maximum time that the PBX waits for a reply after sending the Resume message.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T319
Specifies the maximum time that the PBX waits for a reply after sending the Suspend message.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T322
Specifies the maximum time that the PBX waits for a reply after sending the Status enquiry message.
Value Range
0–600 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T3D3
Specifies the length of time after which the PBX tries to establish L2 in "Permanent" mode.
Value Range
0–3000 ´ 100 ms
Maintenance Console Location
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
T3D9
Specifies the length of time after which the PBX tries to disconnect L2 in "Call by Call" mode.
Value Range
0–3000 ´ 100 ms
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW16—Shelf Property
PC Programming Manual 313