Pbx Configuration—[2-1-2] System—Date & Time—Sntp / Daylight Saving - Panasonic KX-NS1000 Programming Manual

10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP /
Daylight Saving
Automatic clock adjustment and Summer time (daylight saving time) settings of the PBX can be programmed.
Automatic clock adjustment can be performed using one of two methods, ISDN & Caller ID or SNTP (Simple
Network Time Protocol).
To set Summer time, click 10.1.2.1 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight
Saving—Daylight Saving.
Note
The NTP server function of the PBX must be enabled for connected KX-UT series SIP phones to receive
automatic time adjustment information from the PBX. See 28.2.4 Network Service—[2-5] Server
Feature—NTP.
Automatic Time Adjustment—Synchronisation mode
Specifies the synchronisation of the time between the Master unit and Slave units of a One-look network. For
the Master unit, only "Disable" can be selected.
Value Range
Disable: Synchronisation is not enabled (for the Master unit and Stand-alone units)
Enable: Synchronisation is enabled (for Slave units)
Maintenance Console Location
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving
Feature Guide References
5.5.5 Automatic Setup
Automatic Time Adjustment—Automatic Time Correction on Stand-alone mode
Enables the PBX to automatically adjust its clock every day according to the time information provided by the
network.
Value Range
Disable, ISDN & Caller ID (FSK), SNTP
Maintenance Console Location
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving
Feature Guide References
5.5.5 Automatic Setup
SNTP—SNTP Server—IP Address
Specifies the IP address or host name of the SNTP server.
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving
PC Programming Manual 455