Panasonic KX-NS1000 Programming Manual page 248

9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
Value Range
Register, Blank UDP, None
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Feature Guide References
5.2.2.3 Simple Remote Connection
Setting parameters assigned to Remote SIP-MLT—NAT - Keep Alive Packet
Sending Interval Time (s)
Specifies the time interval between transmissions of the Keep Alive packet.
Note
•
This interval must be shorter than the NAT binding time of the router. The default value is appropriate
in most cases.
•
This setting is available only when NAT - Keep Alive Packet Type is set to "Blank UDP".
Value Range
10–60 s
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Feature Guide References
5.2.2.3 Simple Remote Connection
Setting parameters assigned to Remote SIP-MLT—NAT - SIP Register Expire
Time (s)
Specifies the length of time that will elapse before the current registration expires.
Note
This setting is available only when NAT - Keep Alive Packet Type is set to "Register".
Value Range
10–3600 s
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
Feature Guide References
5.2.2.3 Simple Remote Connection
248 PC Programming Manual