Panasonic KX-NS1000 Programming Manual page 1075

WAN QoS—Source
Selects the method of specifying a source.
If ANY is selected for Source, QoS is available for all IP addresses.
If Address is selected for Source, enter the IP address for IP Address below.
If Subnet is selected for Source, enter the subnet mask for Subnet Mask below.
Value Range
ANY, Address, Subnet
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Source—IP Address
Specifies the IP Address to specify a source. If you did not select Address as Source, this item is greyed out.
Value Range
Blank, 1.0.0.1–223.255.255.254
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Source—Subnet Mask
Specifies the subnet mask to specify a source. If you did not select Subnet as Source, this item is greyed out.
Value Range
Blank, 0.0.0.0–255.255.255.255
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Destination
Selects the method of specifying a destination IP address.
If ANY is selected for Destination, QoS is available for all IP addresses.
If Address is selected for Destination, enter the IP address for IP Address below.
If Subnet is selected for Destination, enter the subnet mask for Subnet Mask below.
Value Range
ANY, Address, Subnet
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
27.12 Router Configuration—QoS Settings—[4] QoS Service
PC Programming Manual 1075