9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
CNG Signal Fixation Detection Pattern - SIP Extension
Specifies the CNG signal pattern to be detected before the PBX proceeds the fax operation for SIP extensions.
Value Range
Off, On
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
CED Signal Fixation Detection Time - SIP Extension - SIP Extension
Specifies the minimum length of time required for the CED (called station identification) signal to be detected
by the PBX for SIP extensions.
Value Range
50 ´ n (n=1–100) ms
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
T38 FAX Transmit Level (Network to PBX) A-Law
Specifies the transmission level of G3 fax signals after being converted from T.38 protocol packets, when the
codec used is G.711A.
Value Range
-13–2 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
T38 FAX Transmit Level (Network to PBX) Mu-Law
Specifies the transmission level of G3 fax signals after being converted from T.38 protocol packets, when the
codec used is G.711Mu.
Value Range
-7–8 dB
Maintenance Console Location
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property
T38 FAX Transmit Level A-Law - SIP Extension
Specifies the transmission level of G3 fax signals after being converted from T.38 protocol packets, when the
codec used is G.711A for SIP extensions.
228
PC Programming Manual