Panasonic KX-NS1000 Programming Manual page 392

9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (FSK) Detection Timer
Specifies the total time required by the PBX to detect Caller ID information. To enable this setting,
ID—Caller ID Signalling on this screen should be set to FSK.
Value Range
1040 + (80 ´ n) (n=0–37) ms
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (DTMF) Start Code 1 and Start Code 2
Selects the DTMF code used to detect the beginning of a Caller ID series. Start Code 1 is prior to Start Code
2.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (DTMF) Information Start Code
Selects the DTMF code used to detect the beginning of the information segment of a Caller ID series.
Value Range
None, *, #, A, B, C, D
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
392 PC Programming Manual
Caller