Panasonic KX-NS1000 Programming Manual page 1062

27.10 Router Configuration—VPN—[3-2] IPSec
Value Range
FQDN, User FQDN, WAN IP Address
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
My Identifier
Specifies My Identifier when FQDN or User FQDN is selected for My Identifier Type. If WAN IP Address is
selected for My Identifier Type, this setting is greyed out.
Value Range
1–255 characters
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Peer Identifier Type
Selects the method of specifying Peer Identifier Type.
Value Range
FQDN, User FQDN, IP Address
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Peer Identifier
Specifies Peer Identifier.
Value Range
If FQDN or User FQDN is selected for Peer Identifier Type, enter the Peer Identifier: 1–255 characters
If IP Address is selected for Peer Identifier Type, enter the IP Address as the Peer Identifier: Blank,
1.0.0.1–223.255.255.254
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Nonce (byte)
Specifies the Nonce (Number used ONCE).
Value Range
8–256
1062 PC Programming Manual