Panasonic KX-NS1000 Programming Manual page 331

Packet Sampling Time (G.729A)
Specifies the time interval between measurements (samples) of sound data during a conversation.
The smaller this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 60 ms
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Announce Mode
Specifies if the extension's built-in ANNOUNCE feature is enabled. A KX-NT265, KX-NT300 series, or
KX-NT500 series phone in a remote location with ANNOUNCE enabled can provide the PBX's IP Address
information to other terminals in the remote location in place of manually programming the PBX's IP address
at each terminal.
Value Range
Enable, Disable
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Voice
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Extension Number
Specifies the extension number of the port.
Note
This setting cannot be changed on this screen until the port has been assigned as a secondary port using
the Set Secondary command. See Setting Secondary Ports below for details.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
PC Programming Manual 331