Panasonic KX-NS1000 Programming Manual page 869

Value Range
2–[the value set in Mailbox No. Max. Length (3-8)] digits
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
Feature Guide References
3.2.1.25 Interview Service
All Calls Transfer to Mailbox
If this parameter is set to "Yes", the extension is considered to be a Logical Extension and therefore calls
directed to the extension via Automated Attendant service are automatically forwarded to the extension
mailbox. The extension does not ring when a call is received.
Value Range
No, Yes
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
Feature Guide References
3.2.1.3 Automated Attendant (AA)
Call Transfer Sequence (Selection)
Specifies the method for the Call Transfer Sequence used by the mailbox. Allows each mailbox to be assigned
its own Call Transfer Sequence (Personal Transfer Sequence).
Note
This sequence has higher priority than the alternate extension transfer sequence specified in 24.4 UM
Configuration—[5-4] System Parameters—Parameters—PBX Parameters—
Environment—Alternate Extension Transfer Sequence (Up to 16 digits / [0-9 * # D R F T X , ;]).
Value Range
System, Other
Note
When "System" is selected, the Unified Messaging system uses the extension transfer sequence
pre-programmed in 24.4 UM Configuration—[5-4] System Parameters—Parameters—PBX
Parameters— PBX Environment—Extension Transfer Sequence (Up to 16 digits / [0-9 * # D R F T
X , ;]).
Maintenance Console Location
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting—Mailbox Parameters
20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
PBX
PC Programming Manual 869