Panasonic KX-NS1000 Programming Manual page 329

Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
Headset OFF/ON
Turns on or off the use of a headset with the IP-PT.
Value Range
Headset OFF, Headset ON
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
5.2.1 IP Proprietary Telephone (IP-PT)
C.Waiting with Headset
When headset mode is enabled, selects whether a call waiting tone is heard through the telephone's speaker
phone or the ear piece of the headset. However, this setting is available only for telephones that support both
EHS headsets and waiting tone path switching. (KX-NT556, KX-NT553 only)
Value Range
PT-Tone, Headset
Maintenance Console Location
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
Feature Guide References
2.10.4.2 Call Waiting Tone
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property
PC Programming Manual 329