Um Configuration—[1-3] Mailbox Settings—Auto Configuration - Panasonic KX-NS1000 Programming Manual

20.1.3 UM Configuration—[1-3] Mailbox Settings—Auto
Configuration
Auto Configuration automatically associates extension numbers and mailboxes in bulk. This feature is available
at the Installer level only.
Select the following options
Specifies Auto configuration mode from the following.
Note
In Re-create all mailboxes mode, all voice data is deleted, including data that is recorded in mailboxes.
It is strongly recommended that you backup the voice data that has been recorded in mailboxes.
Backed up voice data can be restored as sound data on a PC by using special software tools. For details,
consult your dealer.
Value Range
Create mailboxes
Re-create all mailboxes
Maintenance Console Location
20.1.3 UM Configuration—[1-3] Mailbox Settings—Auto Configuration
Installation Manual References
5.12 Automatic Configuration of Mailboxes
Feature Guide References
3.1.2.1 Automatic Configuration of Mailboxes
Select UM group where mailboxes are created
Specifies the site where mailboxes are created.
Value Range
Create mailboxes to the UM group of the PBX where extensions belong to (default)
Create mailboxes to the specified UM group
(You can select site number from 1-16)
Maintenance Console Location
20.1.3 UM Configuration—[1-3] Mailbox Settings—Auto Configuration
Installation Manual References
5.12 Automatic Configuration of Mailboxes
Feature Guide References
3.1.2.1 Automatic Configuration of Mailboxes
20.1.3 UM Configuration—[1-3] Mailbox Settings—Auto Configuration
PC Programming Manual 897