Panasonic KX-NS1000 Programming Manual page 475

Value Range
0–15 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual References
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Feature Guide References
2.19.1 Caller ID
Caller ID—Visual Caller ID Display
Specifies the length of time that a Caller ID number, with the Call Waiting tone offered by an analogue line
from the telephone company, is shown on the display. The Caller ID number flashes on the display for five
seconds, followed by a 10-second pause, then flashes again for five seconds.
Value Range
0–250 s
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.1.3.3 Call Waiting
2.10.4.2 Call Waiting Tone
2.19.1 Caller ID
Extension PIN—Lock Counter
Specifies the number of successive incorrect PIN entries allowed before the extension PIN is locked. A locked
extension PIN cannot be used until reset from the extension assigned as manager. (Specifying "None" disables
this counter.)
Value Range
None, 1–15
Maintenance Console Location
10.3 PBX Configuration—[2-3] System—Timers & Counters
Feature Guide References
2.7.5 Walking COS
10.3 PBX Configuration—[2-3] System—Timers & Counters
PC Programming Manual 475