Panasonic KX-NS1000 Programming Manual page 209

Value Range
1024–65534
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Multisite message UDP port number
Specifies the UDP port to be used for Type 2 message communication between the Master unit and Slave
units.
Value Range
1024–65535
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Multisite Keepalive Time-out time
Specifies the Keep Alive Time-Out time in seconds for communication between the Master unit and Slave
units.
Value Range
30, 40, 50, 60, 120, 180, 300, 600, 1800, 3600 s
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Multisite startup monitoring time
Specifies the amount of time in seconds required to pass before a PBX that loses its connection with the Master
PBX switches to Master Backup or Isolated mode.
Value Range
300, 360, 420, 480, 540, 600, 1800, 3600 s
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
V-IPGW
Call Signalling Model
Specifies whether to carry out a call control (H.225) process directly between the cards or through a gatekeeper.
Value Range
Direct, GateKeeper
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
PC Programming Manual 209