Download Print this page

Advertisement

Quick Reference Guide
CSTA Multiplexer
KX-NCP/KX-TDE Series
Model No.
KX-NS1000
Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for future use.
Communication Assistant: Version 4.0 or later
In this manual, the suffix of each model number is omitted (e.g., KX-NCP500NE).

Advertisement

   Summary of Contents for Panasonic KX-NCP

  • Page 1

    KX-NCP/KX-TDE Series Model No. KX-NS1000 Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. Communication Assistant: Version 4.0 or later In this manual, the suffix of each model number is omitted (e.g., KX-NCP500NE).

  • Page 2

    Introduction Introduction CSTA Multiplexer (MUX) is a software application that multiplexes information sent from the PBX, allowing multiple servers or PBX applications to receive information from the PBX. About the Quick Reference Guide This Quick Reference Guide is designed to serve as an overview of the features, setup and installation of CSTA MUX.

  • Page 3: Table Of Contents

    Table of Contents Table of Contents 1 Specifications ...................4 2 System Requirements ................6 3 Software Installation ................8 Installing CSTA MUX ......................8 Uninstalling CSTA MUX ....................9 Quick Reference Guide...

  • Page 4: Specifications

    1 Specifications Introduction to CSTA MUX CSTA is a communication protocol used by CTI applications. KX-NS1000 and KX-NCP/KX-TDE series PBXs support only one CSTA connection at a time. CSTA MUX is software that allows two or more simultaneous CSTA connections with your PBX, which allows two or more CTI applications to be used at the same time.

  • Page 5

    CSTA MUX Information Conditions Notice For the computer running CSTA MUX, disable any sleep mode or hibernation mode settings. This will ensure the program will be able to run without interruption. • A maximum of 4 servers can be set to receive information multiplexed by CSTA MUX. •...

  • Page 6: System Requirements

    2 System Requirements The tables below summarise the minimum and recommended requirements for running CSTA MUX. Minimum Recommended 1.0 GHz Intel Pentium /Celeron 3.2 GHz Intel Pentium 4 or comparable ® ® ® processor or comparable CPU 1024 MB 2048 MB Microsoft Windows XP Professional...

  • Page 7

    Activation Key Model No. Activation Key Type Description KX-NS1000 KX-NCP/KX-TDE KX-NSA020 KX-NCS2020 CSTA Multiplexer CSTA Multiplexer Activation Key for one application. When using CSTA MUX, one CSTA Multiplexer activation key is required for each CTI application. The following CTI applications do not require an activation key: •...

  • Page 8: Software Installation

    IP address of the computer running CSTA MUX, not the IP address of the PBX. • Two listening ports can be set; one for Panasonic CTI applications, and one for third-party CTI applications. Ensure that your CTI applications are set accordingly to communicate with the correct port.

  • Page 9: Uninstalling Csta Mux

    To uninstall CSTA MUX, perform one of the following procedures: • From the Start menu, point to All Programs ® Panasonic ® CSTA MUX, and select Uninstall. • From the Control Panel, double-click Add or Remove Programs, select CSTA MUX, and then click Remove.

  • Page 10

    1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Panasonic System Networks Co., Ltd. 2010 PSQX5054VA KK0709DV4101...

This manual also for:

Kx-tde series, Kx-ns1000

Comments to this Manuals

Symbols: 0
Latest comments: