Feature Guide References
2.6.3 Last Number Redial
Redial—Automatic Redial for Analogue CO
Selects whether Automatic Redial to an analogue trunk is performed when the called party does not answer
within a pre-programmed time period.
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—
Feature Guide References
2.6.3 Last Number Redial
Redial—Save Dial After Connection to Redial Memory
Specifies whether any digits dialled after the called party answers (for example, to access a specific extension
within another company) are also saved as part of the redial number.
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.6.3 Last Number Redial
Redial—Call Log by Redial key
Enables display of the Outgoing Call Log on a display PT by pressing the REDIAL button while on hook.
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
10.9 PBX Configuration—[2-9] System—System Options
Automatic Redial—Redial Call Ring Duration
PC Programming Manual
549