Pbx Configuration—[2-10] System—Extension Cid Settings - Panasonic KX-NS1000 Programming Manual

10.10 PBX Configuration—[2-10]
System—Extension CID Settings
Various settings for extension Caller ID can be programmed.
Extension Caller ID Modulation Type
Specifies the modulation frequency to be used when sending Caller ID information to an SLT.
Value Range
V.23(ETSI), Bell202(Bellcore)
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
Channel Seizure Signal Bits
Specifies the number of seizure bits to send when sending Caller ID information to an SLT.
Value Range
10 ´ n (n=3–40) bits
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
Mark Signal Bits
Specifies the number of mark bits to send when sending Caller ID information to an SLT.
Value Range
10 ´ n (n=3–40) bits
Maintenance Console Location
10.10 PBX Configuration—[2-10] System—Extension CID Settings
Feature Guide References
2.19.1 Caller ID
10.10 PBX Configuration—[2-10] System—Extension CID Settings
PC Programming Manual 569