Pbx Configuration—[1-1] Configuration—Slot—Port Property - Lco Port - Panasonic KX-NS1000 Programming Manual

9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
9.25 PBX Configuration—[1-1]
Configuration—Slot—Port Property - LCO Port
Various settings can be programmed for each analogue trunk port.
The Site, Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Busy Out Status
Indicates the Busy Out status (reference only).
Value Range
Normal, Busy Out
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Feature Guide References
2.5.4.6 Trunk Busy Out
Dialling Mode
Selects the type of signal used to dial out to the analogue trunk.
Value Range
DTMF, Pulse
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Feature Guide References
2.5.4.4 Dial Type Selection
396 PC Programming Manual