Panasonic KX-NS1000 Programming Manual page 362

9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Remote Place
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
CS Name
Specifies the IP-CS (KX-NS0154 only) name of the port.
Note
This setting cannot be changed on this screen until the port has been assigned as a secondary port using
the Set Secondary command. See Setting Secondary Ports above for details.
Value Range
Max. 20 characters
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Connection
Indicates the port status. To change the status of the port, click the desired cell in the column, and then select
INS or OUS for the port.
This option is only available in On-line mode.
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
Feature Guide References
5.2.6 IP-CS (KX-NS0154)
Phone Location
Specifies the location of IP-CS (KX-NS0154 only) connected to the port.
Value Range
Local: The IP-CS is located on the same network as the PBX (standard configuration).
Remote (MRG): The IP-CS is accessing the PBX remotely (use Media Relay Gateway).
Maintenance Console Location
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property
362 PC Programming Manual