Panasonic KX-NS1000 Programming Manual page 1049

Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
VPSS—Advanced Setting
Click here to open the advanced setting menu for VPSS.
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
VPSS - Advanced
Additional LAN on VPN Tunnel sharing (MAX 4 Entries)—Local Network
Address
Specifies the local IP address at an adjacent segment or satellite office for use in VPN tunnel sharing. Up to
4 addresses can be specified (#1–#4).
Value Range
Blank, 1.0.0.0–223.255.255.255
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
Additional LAN on VPN Tunnel sharing (MAX 4 Entries)—Subnet Mask
Specifies the subnet mask at an adjacent segment or satellite office for use in VPN tunnel sharing. Up to 4
addresses can be specified (#1–#4).
Value Range
Blank, 0.0.0.0–255.255.255.255
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
Timer Settings—VPSS Path Established Timer (s)
Specifies the maximum time for establishing a VPSS path.
If the value set is outside of the value range below, 1 or 86400 is displayed.
This setting is not displayed when connecting to the Slave unit directly, or if changing sites when connected
to the Master unit.
Value Range
1–86400 s
Maintenance Console Location
27.9 Router Configuration—VPN—[3-1] VPSS
27.9 Router Configuration—VPN—[3-1] VPSS
PC Programming Manual 1049