Feature Guide References
2.22.3 Call Charge Services
Pay Tone—Pay Tone Pulse - Interval
Specifies the maximum length of time between pay tone signals.
Value Range
8 ´ n (n=1–250) ms
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.22.3 Call Charge Services
Pay Tone—Sending Flash while end talk
Enables the PBX to send a flash signal at the end of call to demand a pay tone signal.
Value Range
Disable, Enable
Maintenance Console Location
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.22.3 Call Charge Services
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
PC Programming Manual
395