Panasonic KX-NS1000 Programming Manual page 1077

Value Range
0–63
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—TOS Mapping—Enable
Specifies whether to enable TOS mapping.
Value Range
OFF, ON
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—TOS Mapping—TOS(DSCP) Value (0-63)
Specifies the TOS (DSCP) value.
If above Enable is not checked, this item is greyed out.
Value Range
0–63
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
Bandwidth Control—Enable
Selects whether to enable bandwidth control.
If Enable is not selected, Priority Queue 0(kbps), Priority Queue 1(kbps), Priority Queue 2(kbps) and
Priority Queue 3(kbps) are greyed out.
Value Range
OFF, ON
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
Bandwidth Control—Upstream—Priority Queue 0(kbps)
Specifies the maximum bandwidth for this queue.
If you did not check Enable as Bandwidth Control, this item is greyed out.
Value Range
Blank, 64–100000 Kbps
27.12 Router Configuration—QoS Settings—[4] QoS Service
PC Programming Manual 1077