Panasonic KX-NS1000 Programming Manual page 292

9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
RTP QoS-ToS Type
Specifies the ToS type in the ToS field.
Value Range
Normal, Monetary Cost, Reliability, Throughput, Delay
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
RTP QoS-DSCP
Specifies the value in the ToS field by a DSCP for DiffServ.
Value Range
0–63
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
RTP QoS-HEX
Specifies the value in the ToS field by a hexadecimal number.
Value Range
00–FF
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
RTCP Packet Sending Ability
Specifies whether to enable each port to send RTCP packets.
Value Range
Disable, Enable
Maintenance Console Location
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW—Port Property
RTCP Packet Interval
Specifies the interval time until the next RTCP packet is sent.
Value Range
5–60 s
292 PC Programming Manual