Panasonic KX-NS1000 Programming Manual page 550

10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.6.3 Last Number Redial
Extension - CO Call Limitation—For Incoming Call
Selects whether the time limit for extension-to-trunk calls applies to outgoing calls only or for both outgoing
and incoming calls. COS determines the use of this feature, and the length of the time limit can be assigned
on a trunk group basis.
Value Range
Enable, Disable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—CO & SMDR—
Line Call Duration Limit
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—
Time (*60s)
Feature Guide References
2.11.8 Trunk Call Limitation
CO - CO Call Limitation—After Conference
Selects whether to allow a call between 2 outside destinations to continue after the originator of the conference
has left the conference.
Value Range
Enable: The call will be disconnected.
Disable: The call will continue.
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.14.2 Conference
4.3.5 QSIG Enhanced Features
Option 3
Confirmation Tone—Tone 1 : Called by Voice
Enables the PBX to send Confirmation Tone 1. Confirmation Tone 1 is heard from a PT when it receives a call
in voice-calling mode.
550 PC Programming Manual
Extension-CO
Extension-CO Duration