Utility—Automatic Two-Way Recording—Extension Setting List - Panasonic KX-NS1000 Programming Manual

7.10.3 Utility—Automatic Two-way Recording—Extension Setting
List
In this list you can view the settings of extensions that are programmed to have calls recorded by the Automatic
Two-way Recording feature. Information for each extension, including the extension's supervisor, UM Group
number, and Automatic Two-way Recording destination mailbox is displayed.
You can specify which types of calls will recorded for each extension. These settings may be changed by a
programmer with a User (Administrator) account.
1.
For an extension, select a setting for Internal Call, External Call, and ICDG Incoming Only. (See below
for details.)
•
Internal Call: Extension-to-extension calls are recorded.
•
External Call: Calls with outside parties are recorded.
•
ICDG Incoming Only: Only calls that are received by the extension through an incoming call
distribution group are recorded.
2.
Select On or Off for that setting.
3.
Click OK when finished.
The programming items displayed on this screen are as follows.
Extension Number
Indicates the extension number of the extension (reference only).
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
7.10.3 Utility—Automatic Two-way Recording—Extension Setting List
Extension Name
Indicates the name of the extension (reference only).
Value Range
Max. 20 characters
Maintenance Console Location
7.10.3 Utility—Automatic Two-way Recording—Extension Setting List
Internal Call
Specifies whether intercom calls for the extension will be automatically recorded.
Note
Calls between extensions that are connected in a QSIG network are seen as external calls, irrespective of
whether an activation key for QSIG enhanced features is used. To enable Automatic Two-way Recording
for this type of call, set
Value Range
On, Off
7.10.3 Utility—Automatic Two-way Recording—Extension Setting List
External Call to On.
PC Programming Manual 159