Pbx Configuration—[1-5] Configuration—Dsp Resource - Panasonic KX-NS1000 Programming Manual

9.34.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting
9.34 PBX Configuration—[1-5] Configuration—DSP
Resource
IP communications that are handled by the PBX require DSP resources. DSP resources can be reserved for
various functions of the PBX.
The DSP resource advisor is a tool that analyses the configuration and user requirements for the system in
order to recommend which DSP card(s) should be used. Click DSP Resource Advisor to access this feature.
(See 9.34.1.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting—DSP Resource
Advisor.)
9.34.1 PBX Configuration—[1-5-1] Configuration—DSP
Resource—Setting
Set the amount of DSP resources to reserve for each PBX function that uses DSP resources.
Option DSP Power
Indicates the total amount of available DSP resources based on the installed DSP card(s) (reference only).
The number of resources provided by each type of DSP card is as follows:
•
DSP S card: 63
•
DSP M card: 127
•
DSP L card: 254
Up to 2 DSP cards can be installed on the mother board.
Because the system reserves 2 resources for internal system functions, the total amount of available resources
indicated will be 2 less than the total resources of the installed card(s).
Value Range
Resource amount (3 digits)
Maintenance Console Location
9.34 PBX Configuration—[1-5] Configuration—DSP Resource
Feature Guide References
5.5.4 DSP Resource Usage
Option DSP #1, Option DSP #2
Indicates the type of the installed DSP card(s) (reference only).
Value Range
DSP S, DSP M, DSP L
Maintenance Console Location
9.34 PBX Configuration—[1-5] Configuration—DSP Resource
446 PC Programming Manual