Panasonic KX-NS1000 Programming Manual page 1083

Note
•
Since communication over a VPN will not be possible, do not set a destination IP address in the VPN
for this setting.
•
If this setting is configured at the same time as the following settings, this setting takes precedence.
–
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings—Static IP—
Alternative DNS IP Address
–
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings—DHCP—
DNS IP Address
–
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings—PPPoE—
DNS IP Address
Value Range
1.0.0.0–223.255.255.255
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Basic Settings
PC Programming Manual References
27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings
Installation Manual References
8.6.5 DNS Client
DSP IP Setting—Obtain DSP IP address automatically/Use the following DSP IP
address
Specifies whether the DHCP server assigns IP address information automatically to the DSP card(s), or to
enter the information manually.
Value Range
Obtain DSP IP address automatically, Use the following DSP IP address
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Basic Settings
DSP IP Setting—DSP Card #1 - 1/DSP Card #1 - 2/DSP Card #2 - 1/DSP Card #2
- 2—IP Address
Specifies the IP address of the DSP card. This parameter is only available for entering values when Use the
following DSP IP address is selected.
Value Range
1.0.0.0–223.255.255.255
Maintenance Console Location
28.1 Network Service—[1] IP Address/Ports—Basic Settings
28.1 Network Service—[1] IP Address/Ports
PC Programming Manual
Alternative
Alternative
1083