Panasonic KX-NS1000 Programming Manual page 1003

IP Address
Indicates the PPPoE IP address provided by the ISP (reference only).
If Connection Mode (refer to 27.2.1 Router Configuration—Setup—[1-2-1] WAN—Connection Settings—
Connection Mode) is not PPPoE, "-" is displayed.
Value Range
0.0.0.0, 1.0.0.1–223.255.255.254
Maintenance Console Location
27.1.2 Router Configuration—Setup—[1-1-2] Router Information—PPPoE Status
Elapsed Time
Indicates the time elapsed since this port acquired the link (reference only).
Value Range
00:00:00–99:59:59
Maintenance Console Location
27.1.2 Router Configuration—Setup—[1-1-2] Router Information—PPPoE Status
Detail Information—Sent Packets
Indicates the number of packets sent from this port since the last reset or manual clear (reference only).
Value Range
0–9999999
Maintenance Console Location
27.1.2 Router Configuration—Setup—[1-1-2] Router Information—PPPoE Status
Detail Information—Received Packets
Indicates the number of packets received on this port since the last reset or manual clear (reference only).
Value Range
0–9999999
Maintenance Console Location
27.1.2 Router Configuration—Setup—[1-1-2] Router Information—PPPoE Status
Detail Information—MTU
Indicates the largest packet size permitted for network transmission (reference only).
If the MTU value range for PPPoE is outside of 256–1492, "-" is displayed.
If the MTU value range for PPP/Ethernet is outside of 256–1500, "-" is displayed.
27.1.2 Router Configuration—Setup—[1-1-2] Router Information—PPPoE Status
PC Programming Manual 1003