Panasonic KX-NS1000 Programming Manual page 214

9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Progress Tone Send Mode
Specifies whether to send call progress tones to the destination. When selecting External, call progress tones
are audible at the destination.
Value Range
External, Internal
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
GW Settings–Option 1
GW Name
Specifies the name of the destination gateway device for programming reference.
Value Range
Max. 20 characters
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
IP Codec Priority—1st, 2nd, 3rd
Specifies the priority of the codecs to be used. For fax communications, it is necessary to specify G.711A or
G.711Mu for 1st priority.
Value Range
For 1st:
G.711A, G.711Mu, G.729A
For 2nd and 3rd:
None, G.711A, G.711Mu, G.729A
Maintenance Console Location
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property
Packet Sampling Time (G.711A)
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
20 ms, 30 ms, 40 ms, 50 ms, 60 ms
214 PC Programming Manual