Panasonic KX-NS1000 Programming Manual page 1057

SA Name
Selects an SA (Security Association) name from drop down list. SA is a connection between VPN gateways.
Value Range
SA Name
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Protocol Type
Selects the protocol to be controlled by IPSec.
Value Range
Any, TCP_UDP, TCP_UDP_ICMP_IGMP, Fixed Protocol No.
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Fixed Protocol Number (0-255)
Specifies the fixed protocol number to be controlled by IPSec.
This setting is available only if Fixed Protocol No. is selected for Protocol.
Value Range
0–255
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Source Type
Selects the source type of the SA.
Value Range
Any, IP Address
Maintenance Console Location
27.10 Router Configuration—VPN—[3-2] IPSec
Source IP Address
Specifies the source IP Address of the SA.
This setting is available only if IP Address is selected for Source Type.
This setting can be set to blank only if Any is selected for Source Type.
27.10 Router Configuration—VPN—[3-2] IPSec
PC Programming Manual 1057