Pbx Configuration—[2-8] System—Ring Tone Patterns - Panasonic KX-NS1000 Programming Manual

10.8 PBX Configuration—[2-8] System—Ring Tone
Patterns
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone
Patterns—Call from CO
Different ring tone patterns can be selected for incoming trunk calls depending on the trunk group that the calls
are received on. A maximum of 8 Ring Tone Pattern Tables can be programmed, and any pattern table can
be selected for use by an extension.
Ring Tone Pattern Plan 1–8
Specifies the ring tone pattern for incoming trunk calls.
Value Range
Single, Double, Triple, Option1, Option2
Maintenance Console Location
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO
PC Programming Manual References
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings—
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—
Pattern Table
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1—
Pattern Table
Feature Guide References
2.1.3.2 Ring Tone Pattern Selection
10.8.1 PBX Configuration—[2-8-1] System—Ring Tone Patterns—Call from CO
Trunk Group Number
PC Programming Manual
Ring
Ring
537