ARS Mode
Specifies the ARS mode used when making a trunk call.
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle Line Access
method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any Trunk Access
method.
Same as System Setting: The setting specified in
ARS—System Setting is applied.
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
PC Programming Manual References
16.1 PBX Configuration—[8-1] ARS—System Setting
Feature Guide References
2.8.1 Automatic Route Selection (ARS)
5.1.3 Tenant Service
System Speed Dial
Specifies which system speed dialling table is used by the tenant.
Value Range
Same as System Setting: PBX common system speed dialling numbers are used.
Tenant Exclusive: Individual tenant system speed dialling numbers are used.
Maintenance Console Location
14.6 PBX Configuration—[6-6] Feature—Tenant
PC Programming Manual References
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Feature Guide References
2.6.4 Speed Dialling—Personal/System
5.1.3 Tenant Service
Time Service Mode
Specifies which PBX's clock in a One-look network is used as reference for the tenant's Time Service functions
and for ICD Group functions.
14.6 PBX Configuration—[6-6] Feature—Tenant
ARS Mode in 16.1 PBX Configuration—[8-1]
PC Programming Manual
777