Panasonic KX-NS1000 Programming Manual page 1074

27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Priority Settings—Priority Queue No.
Selects which queue number is prioritised.
If Enable is not checked as WAN QoS—Priority Settings, this item is greyed out.
Value Range
0–3
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Protocol No.
Selects the method of specifying protocols for which QoS is applied.
If ANY is selected for Protocol No., QoS is available for all protocols.
If Select Protocol is selected for Protocol No., specify the protocol type for Select Protocol below.
If Other ( 0 - 255 ) is selected for Protocol No., specify the protocol number for Other ( 0 - 255 ) below.
Value Range
ANY, Select Protocol, Other ( 0 - 255 )
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Protocol No.—Select Protocol
Selects the protocol name for which QoS is applied. This setting is available only if Select Protocol is selected
for WAN QoS—Protocol No..
Value Range
ICMP, TCP, UDP, TCP&UDP
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Protocol No.—Other ( 0 - 255 )
Specifies the protocol number for which QoS is applied. This setting is available only if Other ( 0 - 255 ) is
selected for WAN QoS—Protocol No..
Value Range
Blank, 0–255
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
1074 PC Programming Manual