Pbx Configuration—[3-11-2] Group—Vm(Dpt) Group—Unit Settings - Panasonic KX-NS1000 Programming Manual

11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT)
Group—Unit Settings
A VM (DPT) group has a floating extension number, which can be assigned as the destination for redirected
calls and incoming calls.
To assign members to the group, click Member List. To view a list of all programmed extension numbers and
types, click Extension List View (see 6.5 Tool—Extension List View).
Notice
This screen is for programming legacy gateway PBXs. For information about setting up a legacy gateway
PBX, see 9.29 PBX Configuration—[1-1] Configuration—Slot—Legacy-GW1/Legacy-GW2.
Unless noted otherwise, the programming information is the same as described in the PC Programming
Manual of the legacy gateway PBX. Refer to the corresponding Group—VM(DPT) Group—Unit
Settings section in the PC Programming Manual of the legacy gateway PBX for more information.
11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit Settings
PC Programming Manual 641