Panasonic KX-NS1000 Programming Manual page 684

12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Notice
For each KX-UT series SIP phone that is connected to the PBX, at least one DN button must be assigned
to the extension. Without a DN button assigned, the extension will not be able to make or receive calls.
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
PC Programming Manual References
12.1.4.1 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—Flexible button data copy
Parameter Selection (for Single CO)
Specifies the trunk to be accessed.
Value Range
1–600
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide References
2.5.5.3 Trunk Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Value Range
1–96
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide References
2.5.5.3 Trunk Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone.
Value Range
Automatic, Specific
Maintenance Console Location
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
684 PC Programming Manual