Panasonic KX-NS1000 Programming Manual page 1044

27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Note
•
If TCP or TCP&UDP is selected for Protocol Number—Protocol Name, default value is FTP.
•
If ICMP is selected for Protocol Number—Protocol Name or Protocol Name is not selected for TCP/
UDP Source Port, this item is greyed out.
Value Range
If TCP is selected for Protocol Number—Protocol Name, the following protocol types can be selected:
FTP(20/21), SSH(22), Telnet(23), HTTP(80), HTTPS(443), POP3(110), POS3S(995), IMAP(143), SMTP(25)
If UDP is selected for Protocol Number—Protocol Name, the following protocol types can be selected:
DNS(53), DHCP(67/68), TFTP(69), SNMP(161/162)
If TCP&UDP is selected for Protocol Number—Protocol Name, the following protocol types can be selected:
FTP(20/21), SSH(22), Telnet(23), HTTP(80), HTTPS(443), POP3(110), POS3S(995), IMAP(143), SMTP(25),
DNS(53), DHCP(67/68), TFTP(69), SNMP(161/162)
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Filter—TCP/UDP Source Port—Port Number
Specifies the start and end port numbers.
If ICMP is selected for Protocol Number—Protocol Name, this item is greyed out.
Value Range
0–65535
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Filter—TCP/UDP Destination Port
Selects the method of specifying the TCP/UDP Destination Port.
If ICMP is selected for Protocol Number—Protocol Name, this item is greyed out.
Value Range
ANY, Protocol Name, Port Number
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Filter—TCP/UDP Destination Port—Protocol Name
Selects the protocol type.
If ICMP is selected for Protocol Number—Protocol Name, or Protocol Name is selected for TCP/UDP
Destination Port, this item is greyed out.
1044 PC Programming Manual