Panasonic KX-NS1000 Programming Manual page 919

Maintenance Console Location
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group
Day, Night, Lunch, and Break Mode - Incoming Call Service Parameter
Specifies the parameter for the type of Incoming Call Service specified. This is disabled if "Voice Mail
Service" or "Automated Attendant" is selected for the Incoming Call Service.
Value Range
Interview Mailbox: Mailbox number
Custom Service: Custom Service number (1–200)
Fax Service: Mailbox number
Transfer to Mailbox: Mailbox number
Note
Mailbox numbers are between 2 digits and the value set in
Maintenance Console Location
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group
Day, Night, Lunch, and Break Mode - Incoming Call Service Prompt
Specifies the language of system prompts used by this call service. If set to "Primary", the default language
which is selected from all installed languages will be used. When set to "Selective", the caller can select the
language of his or her choice, provided the System Administrator or the Message Manager has recorded the
Multilingual Selection Menu. To specify a Prompt Selection Number, see 24.4 UM Configuration—[5-4]
System Parameters—Parameters—Prompt Setting.
Note
If "Selective" is specified, you will need to select a prompt available for callers that cannot input DTMF
signals, such as rotary phone callers. See "Prompt for No DTMF Input Callers" below.
Value Range
Primary, Selective, Guidance No. 1–8
Maintenance Console Location
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group
PC Programming Manual References
24.4 UM Configuration—[5-4] System Parameters—Parameters—Prompt Setting—
Feature Guide References
3.2.1.42 System Prompts
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group
Mailbox No. Max. Length (3-8).
Primary Language
PC Programming Manual 919