Panasonic KX-NS1000 Programming Manual page 1020

27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Destination IP Address
Specifies the destination IP address for ICMP echo requests.
If Disable is selected for
Value Range
1.0.0.1–223.255.255.254
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Interval (s)
Specifies the interval of the polling timer used for sending ICMP echo requests.
Value Range
1–3600 s
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Fail Count
Specifies the maximum count of ICMP echo failures.
If Disable is selected for
Value Range
1–255
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
Recovery Count
Specifies the number of ICMP echo replies received for ICMP recovery to be detected from the fault state.
If Disable is selected for
Value Range
1–255
Maintenance Console Location
27.2.2 Router Configuration—Setup—[1-2-2] WAN—Network Monitor
1020 PC Programming Manual
ICMP Keep-Alive Enabled, this setting cannot be specified.
ICMP Keep-Alive Enabled, this setting cannot be specified.
ICMP Keep-Alive Enabled, this setting cannot be specified.