Router Configuration—Firewall—[2-2] Packet Filtering - Panasonic KX-NS1000 Programming Manual

27.8 Router Configuration—Firewall—[2-2] Packet
Filtering
By specifying the IP address, port and protocol parameters, it is possible to either pass or intercept IP packets
that are being received. If the parameters are set effectively they can be used as a security measure.
LAN->WAN Basic Policy
Indicates whether to accept or discard packets as the basic policy from LAN to WAN (reference only).
If Discard is displayed, all packets from LAN to WAN are intercepted.
Value Range
Accept, Discard
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
WAN->LAN Basic Policy
Indicates whether to accept or discard packets as the basic policy from WAN to LAN (reference only).
If Discard is displayed, all packets from WAN to LAN are intercepted.
Value Range
Accept, Discard
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Filter
Indicates whether to enable the packet filtering function (reference only).
Value Range
Enable, Disable
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
Protocol No.
Indicates the protocol type or the protocol number (0–255) (reference only).
Value Range
ANY, ICMP, TCP, UDP, TCP&UDP, 0–255
Maintenance Console Location
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
27.8 Router Configuration—Firewall—[2-2] Packet Filtering
PC Programming Manual 1039