Panasonic KX-NS1000 Programming Manual page 663

Extension Name
Specifies the name of the extension.
Value Range
Max. 20 characters
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Outgoing Preferred Line
Selects the line to be seized after going off-hook to make a call.
Value Range
No Line: No line is seized.
Idle: An idle trunk is seized automatically from the programmed trunk groups.
ICM/PDN: An extension line is seized, or, for a PDN extension, an idle PDN button is selected.
F-1–F-84: A trunk programmed for a flexible button (F-1–F-84) is seized. A flexible button customised as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual References
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide References
2.5.5.2 Line Preference—Outgoing
Incoming Preferred Line
Selects the line on which an incoming call is answered after going off-hook.
Note that even if a specific PDN button is selected here, a call ringing at any PDN button on the extension will
be answered when going off-hook.
Value Range
No Line: No line is selected. Select a line by pressing the desired Line Access button to answer a call.
Ringing Line: The longest ringing call is selected.
PDN: The call arriving at any PDN button is selected.
F-1–F-84: The call arriving at a flexible button (F-1–F-84) is selected. A flexible button customised as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
PC Programming Manual 663