Router Configuration—Setup—[1-6] Mac Address - Panasonic KX-NS1000 Programming Manual

27.6 Router Configuration—Setup—[1-6] MAC
Address
MAC Address Clone
Selects whether to clone the MAC address of your PC's network adaptor onto this router.
Value Range
Enable, Disable
Maintenance Console Location
27.6 Router Configuration—Setup—[1-6] MAC Address
MAC Address (xx:xx:xx:xx:xx:xx)
Specifies the MAC address of your PC's network adaptor.
After specifying the MAC address, you must restart the PBX. It is recommended to use the System Reset
command of the PBX.
If Disable is selected for
Value Range
00:00:00:00:00:00–FF:FF:FF:FF:FF:FF
Maintenance Console Location
27.6 Router Configuration—Setup—[1-6] MAC Address
PC Programming Manual References
5.4 System Control—System Reset
MAC Address Clone, this item is greyed out.
27.6 Router Configuration—Setup—[1-6] MAC Address
PC Programming Manual 1035