Panasonic KX-NS1000 Programming Manual page 1076

27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Destination—IP Address
Specifies the IP Address to specify a destination. If you did not select Address as Destination, this item is
greyed out.
Value Range
Blank, 1.0.0.1–223.255.255.254
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—Destination—Subnet Mask
Specifies the subnet mask to specify a destination. This setting is available only if Subnet is selected for
Destination.
Value Range
Blank, 0.0.0.0–255.255.255.255
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—TOS (DSCP)—Enable
Specifies whether to enable QoS by using the DSCP value.
Value Range
OFF, ON
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—TOS (DSCP)
Selects the method of specifying DSCP value.
Value Range
ANY, TOS(DSCP) Value (0-63)
Maintenance Console Location
27.12 Router Configuration—QoS Settings—[4] QoS Service
WAN QoS—TOS (DSCP)—TOS(DSCP) Value (0-63)
Specifies the TOS (DSCP) value.
If TOS(DSCP) Value (0-63) is not selected for TOS (DSCP), this item is greyed out.
1076 PC Programming Manual