Panasonic KX-NS1000 Programming Manual page 757

Feature Guide References
2.18.3 External Sensor
Tenant No.
Specifies the tenant to which the sensor belongs, to determine the Time Table for the sensor. (The tenant
number corresponds to the Time Table number.)
Value Range
1–32 or 1–128
Note
The maximum number of tenants depends on the System Capacity Selection setting made when the
Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the maximum
number of tenants is 128. If the Standard Type or IP-Extension Type was selected, the maximum number
of tenants is 32. For details, refer to "5.4.1 Easy Setup Wizard" in the Installation Manual.
Maintenance Console Location
13.5 PBX Configuration—[5-5] Optional Device—External Sensor
PC Programming Manual References
10.4 PBX Configuration—[2-4] System—Week Table
Feature Guide References
2.18.3 External Sensor
5.1.3 Tenant Service
13.5 PBX Configuration—[5-5] Optional Device—External Sensor
PC Programming Manual 757