Checking The Configuration; Maintaining Ip Performance - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service

6.3.7 Checking the Configuration

Prerequisites
The configurations of optimizing IP performance are complete.
Procedure
l
l
l
l
l
l
l
l
l
l
l
l
l
l
----End

6.4 Maintaining IP Performance

This section describes how to maintain IP performance.
Issue 01 (2012-03-15)
Run the display tcp status [ [ task-id task-id ] [ socket-id socket-id ] | [ local-ip ip-
address ] [ local-port local-port-number ] [ remote-ip ip-address ] [ remote-port remote-
port-number ] ] command to check the TCP connection status.
Run the display tcp statistics command to check the statistics on TCP traffic.
Run the display udp statistics command to check the statistics on UDP traffic.
Run the display ip statistics command to check the statistics on IP traffic.
Run the display ip socket [ monitor ] [ task-id task-id socket-id socket-id | sock-type
socket-type ] command to check information about the created IPv4 socket.
Run the display icmp statistics command to check the statistics on ICMP traffic.
Run the display fib [ slot-id ] command to check the Forwarding Information Base (FIB)
table on the Line Processing Unit (LPU).
Run the display fib [ slot-id ] [ vpn-instance vpn-instance-name ] [ verbose ] command
to check information about the FIB table.
Run the display fib [ vpn-instance vpn-instance-name ] acl acl-number [ verbose ]
command to check information about the FIB entries that match ACL rules in a certain
format.
Run the display fib [ vpn-instance vpn-instance-name ] interface interface-type interface-
number command to check information about the FIB entries with the outgoing interface
as a specified interface.
Run the display fib [ vpn-instance vpn-instance-name ] ip-prefix prefix-name
[ verbose ] command to check information about the FIB entries that match a specified IP
prefix list.
Run the display fib [ slot-id ][ vpn-instance vpn-instance-name ] destination-address1
[ destination-mask1 ] [ longer ] [ verbose ] command to check information about the FIB
entries that match destination IP addresses in a specified range.
Run the display fib [ vpn-instance vpn-instance-name ] next-hop ip-address command
to check information about the FIB entries that match the specified next hop address.
Run the display fib [ slot-id ] [ vpn-instance vpn-instance-name ] statistics command to
check the total number of FIB entries.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 IP Performance Configuration
121