Ipv4 Over Ipv6 Tunnel Configuration - Huawei S9300 Configuration Manual

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
12
About This Chapter
The IPv4 over IPv6 tunnel technology is used to interconnect isolated IPv4 networks during the
transition from IPv4 Internet into the IPv6 Internet.
12.1 Introduction to IPv4 over IPv6
You can create tunnels on the IPv6 networks to connect IPv4 isolated sites so that IPv4 isolated
sites can access other IPv4 networks through the IPv6 Internet.
12.2 IPv4 over IPv6 Supported by the S9300&S9300E
This section describes how to interconnect IPv4 networks through IPv6 networks.
12.3 Configuring an IPv4 over IPv6 Tunnel
This configuration task enables transmission of an IPv4 packet added with an IPv6 header on
the device configured with the IPv4/IPv6 dual stack.
12.4 Maintaining IPv4 over IPv6 Tunnels
This section describes how to maintain an IPv4 over IPv6 tunnel, including how to monitor an
IPv4 over IPv6 tunnel.
12.5 Configuration Examples
This section provides configuration examples of IPv4 over IPv6 tunnel.
Issue 01 (2012-03-15)

IPv4 over IPv6 Tunnel Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 IPv4 over IPv6 Tunnel Configuration
222