Huawei S9300 Configuration Manual page 242

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
2.
Issue 01 (2012-03-15)
[SwitchD-Vlanif100] ipv6 address 2002::2 64
[SwitchD-Vlanif100] quit
[SwitchD] isis 1
[SwitchD-isis-1] network-entity 10.0000.0000.0003.00
[SwitchD-isis-1] ipv6 enable topology standard
[SwitchD-isis-1] quit
[SwitchD] interface vlanif 100
[SwitchD-Vlanif100] isis ipv6 enable 1
[SwitchD-Vlanif100] quit
Set the IPv4 address and OSPF for the physical interface of the IPv4 network to implement
IP connectivity of the IPv4 network.
# Configure Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan batch 100
[SwitchA] interface gigabitethernet 1/0/0
[SwitchA-GigabitEthernet1/0/0] port hybrid pvid vlan 100
[SwitchA-GigabitEthernet1/0/0] port hybrid untagged vlan 100
[SwitchA-GigabitEthernet1/0/0] quit
[SwitchA] interface vlanif 100
[SwitchA-Vlanif100] ip address 10.1.2.2 30
[SwitchA-Vlanif100] quit
[SwitchA] ospf 1
[SwitchA-ospf-1] area 0
[SwitchA-ospf-1-area-0.0.0.0] network 10.1.2.0 0.0.0.3
[SwitchA-ospf-1-area-0.0.0.0] quit
[SwitchA-ospf-1] quit
# Configure Switch B.
<SwitchB> system-view
[SwitchB] vlan batch 100 200
[SwitchB] interface gigabitethernet 1/0/0
[SwitchB-GigabitEthernet1/0/0] port hybrid pvid vlan 100
[SwitchB-GigabitEthernet1/0/0] port hybrid untagged vlan 100
[SwitchB-GigabitEthernet1/0/0] quit
[SwitchB] interface vlanif 100
[SwitchB-Vlanif100] ip address 10.1.2.1 30
[SwitchB-Vlanif100] quit
[SwitchB] ospf 1
[SwitchB-ospf-1] area 0
[SwitchB-ospf-1-area-0.0.0.0] network 10.1.2.0 0.0.0.3
[SwitchB-ospf-1-area-0.0.0.0] quit
[SwitchB-ospf-1] quit
# Configure Switch D.
<SwitchD> system-view
[SwitchD] vlan batch 100 200
[SwitchD] interface gigabitethernet 2/0/0
[SwitchD-GigabitEthernet2/0/0] port hybrid pvid vlan 200
[SwitchD-GigabitEthernet2/0/0] port hybrid untagged vlan 200
[SwitchD-GigabitEthernet2/0/0] quit
[SwitchD] interface vlanif 200
[SwitchD-Vlanif200] ip address 10.1.3.1 30
[SwitchD-Vlanif200] quit
[SwitchD] ospf 1
[SwitchD-ospf-1] area 0
[SwitchD-ospf-1-area-0.0.0.0] network 10.1.3.0 0.0.0.3
[SwitchD-ospf-1-area-0.0.0.0] quit
[SwitchD-ospf-1] quit
# Configure Switch E.
<Quidway> system-view
[Quidway] sysname SwitchE
[SwitchE] vlan batch 200
[SwitchE] interface gigabitethernet 1/0/0
[SwitchE-GigabitEthernet1/0/0] port hybrid pvid vlan 200
[SwitchE-GigabitEthernet1/0/0] port hybrid untagged vlan 200
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12 IPv4 over IPv6 Tunnel Configuration
231