Huawei S9300 Configuration Manual page 51

S9300&S9300E Terabit Routing Switch
Configuration Guide - IP Service
Figure 2-6 Networking diagram for configuring inter-VLAN proxy ARP
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure the super-VLAN and sub-VLAN.
# Configure sub-VLAN 2.
<Quidway> system-view
[Quidway] vlan 2
[Quidway-vlan2] quit
# Add GE 1/0/0 and GE 1/0/1 to sub-VLAN 2.
[Quidway] interface gigabitethernet 1/0/0
[Quidway-GigabitEthernet1/0/0] port link-type access
[Quidway-GigabitEthernet1/0/0] port default vlan 2
Issue 01 (2012-03-15)
Switch
VLAN2
VLAN2
Configure a super-VLAN and a sub-VLAN.
Add an interface to the sub-VLAN.
Create an VLANIF interface of the super-VLAN and assign an IP address to the VLANIF
interface.
Enable inter-VLAN proxy ARP.
VLAN IDs of the super-VLAN and sub-VLAN
GE 1/0/1 and GE 1/0/0 belonging to sub-VLAN 2
GE 2/0/0 and GE 2/0/1 belonging to sub-VLAN 3
IP address and subnet mask of VLANIF 4 in super-VLAN 4 being 10.10.10.1 and
255.255.255.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
VLAN3
VLAN4
VLAN3
2 ARP Configuration
40